Dipping Type Turbine Flowmeter

Turbine (impeller) flow sensor F3.00 can be used in all liquid free-solid-particle, simple and reliable.Even at low speed flowing liquid like 0,15 m/sec, F3.00 Turbine (impeller) flow sensor can measure the flow rate with high repeatability.It does not required very little or any maintenance with robust construction and proven technology.Safely can be connected to PLC or a any digital inputs system with Push-Pull (that is operable in both PNP and NPN input system) technology that new electronic technology.Can be easily mounted on the pipe in line diameter between DN15 and DN600 with specially designed connection apparatus.

General Properties
  • CPVC, PVDF, Brass or Stainless Steel Body
  • Easily Placement System
  • Different Versions for Compact and Remote (seperate type)
  • Measurement Scala 50:1
  • High Chemical Resistance
  • Battery-Powered Version
  • 4-20mA Electrical Output
  • Push-Pull Universal Electrical Connection
Application Areas
  • Water Treatment Industrial
  • Textil Sektor
  • Drinking Water and Source Water Production Sector
  • Liquid Filling Machines
  • Water Distribution, Processing and Manufacturing Industry
  • Fitration Systems
  • Chemical Production Sector
  • Cold Water Monitoring
  • Swimming Pools
  • Pomp Protection
Technical Documentation
Technical Properties
  • Brand:FIP ( Made in Italya)
  • Type: F3.00.P.XX
  • temperature : 80°C (100°C and 125 °C optional)
  • Connection Size: Between DN 15 and DN600 (0,5” – 24”)
  • Flow Speed: 0,15 – 8 m/sec
  • Lineerity: at full scala 0,75 %
  • Precision: 1 %
  • Protection Class: IP68
  • Sensor Bodies: CPVC, PVDF, Brass, Stainless Steel
  • Supply Voltage: 5 – 24 Volt DC
  • Output Signal: Puls Push-Pull (4-20mA optional)
  • Mounting Position : Horizontal and Vertical (up)
  • Pressure: 10 Bar (25 Bar Optional)

rst-electronics