Inline Type Air Flow Transmitter FTM06D-I
Features:
- Thermal mass flow sensor:
- Accuracy : ±1.5% F.S., Operating pressure : Max. 16 bar
- Multiple output option : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency / Pulse ( Option )
- Full pipe size range ( DN15 / DN25 / DN40 / DN50 ), easy installation
- Temperature correction built in, precise measurement
- Sonic nozzle calibration method used for calibration
- Stainless steel housing, aluminum alloy pipe
- Data logging, graph recording, and cumulative flow display are made possible by connecting to software through RS-485 (optional).
Applications:
- Compressed air system
- Pneumatic system
- Refrigerated air dryer
- Adsorption air dryer
- Air consumption monitoring
- Pipeline leak monitoring
Technical Properties:
- Input
- Sensor type : Thermal mass flow sensor
- Measuring range : DN15 : 0.1 ... 76 m³/h
DN25 : 0.4 ... 212 m³/h
DN40 : 0.9 ... 543 m³/h
DN50 : 1.5 ... 848 m³/h
*The measurement range is defined at the standard condition(1013 mbar, 20°C). - Output signal : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency ( 0 ... 100 Hz ) / Pulse ( 1 ... 100 l/pulse, option )
- Signal connection : 3-wire
- Warm-up time : About 60 sec
- Response time : t90≦3 sec
- Load resistance : Voltage output : ≧100 KΩ / Current output : ≦250 Ω
- Accuracy : ±1.5% F.S.
- Temp. influence : 0.05% / °C
- Repeatability : 0.5%
- Medium : Air / Non-corrosive gas
- Operating Temp. & Humid. : 0 ... 50°C / 20 ... 90%RH(Non-condensing)
- Storage Temp. : -20 ... 85°C
- Operating pressure : 16 bar
- Power supply : DC 24 V ±10%
- Current consumption : 24 V : 110 mA
- Electrical connection : M12
- Pipe size : DN15 ( 1/2″ )DN25 ( 1″ )DN40 ( 1-1/2″ )DN50 ( 2″)
- Pipe connection : G thread
- Certification : CE
- IP rating : IP65 (IP67 option)
- Electrical protection : Reverse polarity, Over-voltage, Short-circuit
- Cover : PC
- Housing : SUS304
- Pipe : Aluminum alloy
- Probe head : PC with glass fiber
- Weight : DN15 ( 1/2″ ) : 697 g
DN25 ( 1″ ) : 811 g
DN40 ( 1-1/2″ ) : 1232 g
DN50 ( 2″) : 1021 g
